7V 1.4W Solar Panel Water Pump With Dual Extruder For 20,000 Hours Life

Descriptions:

The pump starts automatically 3 seconds when bright sunlight is lit.
The solar panel directly without any shadows.

Specifications:

Solar panel: 7V / 1.4W
Diameter: 6.3 inches / 16cm
Brushless pumping input: DC 4.5-10V
Maximum flow rate: 40 gallons / H (150L / hr)
Maximum discharge height: 18 "/ 45cm, Regular: 10 ~ 15" / 25cm - 38cm

Mode of operation Combination:

1.Removing the cuticle, Collect the product according to the sketch card.
2.Set it in the places where the solar panel is not protected from the sum. Then it will work normally as soon as the sunshine is enough.
3.If there is some air in the pump. You should not connect the spray head to the pump until all air is blown out and it sprays normally.

Notes:

1.The pump is driven directly by sunlight. So it will only work continuously if the sunlight is sufficient. Since the power of the solar panel depends on sunlight, the pump is also affected by weather, seasons, places, etc.
2.Don't make the pump without water for a long time, or its life will be shortened.
3. Wash the pump regularly. If it is duty, it will stop working.
4. Be careful when using. And do not let children play with it.
5.Products for the solar direct drive pump, no additional battery, the height of the water depends entirely on the strength of the sun, when the sun is weak, the pump will not work continuously, there will be a water spray of the situation Continuously.

Package Included:

1 x solar pump
2 x spray nozzles
1 x manual